The toilet brands in the Chinese market now make some foreign buyers and customers do not know how to choose when purchasing, because there are many toilet brands in China, and it is necessary to conduct various market research and investigations in order to choose a high-quality supplier. So what are the tips for choosing a toilet brand? After purchasing the toilet, how should it be maintained? The following aspects are for you to sort out some knowledge of toilet brand selection.
What are the tips for choosing a toilet brands?
1.Weight
The heavier the toilet, the better. An ordinary toilet weighs about 50 jin, and a good one weighs about 100 jin. A heavy toilet has a high density and a relatively good quality. A simple way to test the weight of the toilet: pick up the water tank cover with both hands and weigh it.
2.Glazed surface
Pay attention to the glazed surface of the toilette. The glazed surface of a high-quality toilet should be smooth, smooth, free of bubbles, and saturated in color. After inspecting the glazed surface of the outer surface, you should also touch the sewer of the toilet. If it is rough, it will easily cause hanging in the future.
3.Outlet
There is only one drain hole at the bottom of the toilet, and now many brands have 2-3 drain holes (according to different calibers), but the more drain holes, the more impact the momentum. The water outlet of the bathroom can be divided into the lower drainage and the horizontal drainage. It is necessary to measure the distance from the drainage outlet to the wall behind the water tank, and buy the same type of toilet to “mate the distance”, otherwise the toilet cannot be installed. The water outlet of the horizontal drainage toilet should be the same as the The height of the horizontal drainage outlets is equal and slightly higher to ensure the smooth flow of sewage. The one with a distance of 300 mm is a middle toilet; the one with a distance of 200 to 250 mm is a rear toilet; the one with a distance of more than 400 mm is a front toilet. Not smooth.
4. The caliber
Large-diameter sewage pipes with glazed inner surfaces are not easy to hang dirty, and the sewage is discharged quickly and powerfully, which can effectively prevent blockage. The test method is to put the whole hand into the toilet mouth, generally it is better to have a palm capacity
Maintenance of the toilet
1.Do not place it under direct sunlight, near a direct heat source or exposed to oil fume, otherwise it will cause discoloration.
2.Do not place hard and heavy objects, such as water tank covers, flower pots, buckets, pots, etc., otherwise it will scratch the surface or cause cracking.
3.The cover plate and the seat ring should be cleaned with a soft cloth. Do not use strong acid, strong carbon and cleaning powder for cleaning. Do not use volatile agents, thinners or other chemicals for cleaning, otherwise the surface will be corroded. Do not use sharp objects such as wire brushes and blades to clean.
4.When the cover plate is installed in no water tank or low water tank, people should not lean back, otherwise it will break.
5.The cover plate should be opened and closed gently to avoid direct collision with the water tank and leave marks that will affect the appearance; or may cause breakage.
6.For products using metal hinges (metal screws), care should be taken not to allow acidic and alkaline solvents to attach to the product, otherwise it is easy to rust.
